2026

  1. Analysis of compliant tube properties and operating conditions in a Liebau pump European Journal of Mechanics, B/Fluids, Vol. 117
  2. Hybrid section-based modeling of gas-phase hydrodynamics in biotrickling filters: Influence of packing material on residence time distributions Biochemical Engineering Journal, Vol. 227
  3. Stability analysis of the tip streaming flow in a coflowing device Physical Review Fluids, Vol. 11, Núm. 2, pp. 1-14
  4. Versatile and Highly Efficient MRI Simulation of Arbitrary Motion in KomaMRI Magnetic Resonance in Medicine, Vol. 95, Núm. 3, pp. 1791-1803

2025

  1. A Novel Valveless Pulsatile Flow Pump for Extracorporeal Blood Circulation Annals of Biomedical Engineering, Vol 53, pp 966-979
  2. A semi-empirical model to predict resonant conditions in valveless asymmetric pumping Journal of Fluid Mechanics , Vol. 1007, p. A2
  3. Impact of transcatheter aortic valve implantation depth on hemodynamic flow: a computational fluid dynamics study Revista Española de Cardiología
  4. Modeling Liebau pumping under resonant conditions Physics of Fluids, Vol. 37, Núm. 7

2024

  1. A reduced order model formulation for left atrium flow: an atrial fibrillation case Biomechanics and Modeling in Mechanobiology, Vol. 23, Núm. 4, pp. 1411-1429
  2. An assessment of the suitability of a Liebau pump in biomedical applications Physics of Fluids, Vol. 36, Núm. 1
  3. Global stability analysis of hydrodynamic focusing in the presence of a soluble surfactant Journal of Fluid Mechanics, Vol. 997
  4. Reduced-order models of wall shear stress patterns in the left atrial appendage from a data-augmented atrial database Applied Mathematical Modelling, Vol. 130, pp. 713-727
  5. Stable production of fluid jets with vanishing diameters via tip streaming Journal of Fluid Mechanics, Vol. 983

2023

  1. A convenient method to validate the gas flow of a CFD-CT simulation applied on a packed bed used in gas biofiltration through residence time distributions Chemical Engineering Journal, Vol. 451
  2. Experimental characterization of an asymmetric valveless pump based on soft robotics technology Physics of Fluids, Vol. 35, Núm. 6
  3. Fluid-dynamic impact of commissural alignment in transcatheter aortic valve implantation Revista Espanola de Cardiologia
  4. Influence of a soluble surfactant on the transition to tip streaming Experimental Thermal and Fluid Science, Vol. 141
  5. The role of charge relaxation in electrified tip streaming Physics of Fluids, Vol. 35, Núm. 1
  6. UVaFTLE: Lagrangian finite time Lyapunov exponent extraction for fluid dynamic applications Journal of Supercomputing, Vol. 79, Núm. 9, pp. 9635-9665

2018

  1. Viability of unidirectional radial turbines for twin-turbine configuration of OWC wave energy converters Ocean Engineering, Vol. 154, pp. 288-297
  2. Shape optimization of a long-tapered R134a ejector mixing chamber Energy, Vol. 165, pp. 422-438
  3. Experimental evaluation of thermal comfort, ventilation performance indices and exposure to airborne contaminant in an airborne infection isolation room equipped with a displacement air distribution system Energy and Buildings, Vol. 158, pp. 209-221
  4. Experimental assessment of different mixing air ventilation systems on ventilation performance and exposure to exhaled contaminants in hospital rooms Energy and Buildings, Vol. 177, pp. 207-219
  5. Experimental and numerical study of the influence of the plenum box on the airflow pattern generated by a swirl air diffuser Experimental Thermal and Fluid Science, Vol. 99, pp. 547-557
  6. Benchmark for Numerical Models of Stented Coronary Bifurcation Flow Journal of Biomechanical Engineering, Vol. 140, Núm. 9
  7. Analytical solution for the coupled heat and mass transfer formulation of one-dimensional drying kinetics Journal of Food Engineering, Vol. 230, pp. 99-113

2016

  1. Understanding bottom-up continuous hydrothermal synthesis of nanoparticles using empirical measurement and computational simulation Nano Research, Vol. 9, Núm. 11, pp. 3377-3387
  2. Real-Time Chemical Analysis of E-Cigarette Aerosols by Means of Secondary Electrospray Ionization Mass Spectrometry Chemistry – A European Journal, Vol. 22, Núm. 7, pp. 2452-2457
  3. Prediction of residence time distributions in supercritical hydrothermal reactors working at low Reynolds numbers Chemical Engineering Journal, Vol. 299, pp. 373-385
  4. Numerical study of supercritical and transcritical injection using different turbulent Prandlt numbers: A second law analysis Journal of Supercritical Fluids, Vol. 115, pp. 86-98
  5. Numerical modeling and experimental validation of a universal secondary electrospray ionization source for mass spectrometric gas analysis in real-time Sensors and Actuators, B: Chemical, Vol. 223, pp. 217-225
  6. Influence of human breathing modes on airborne cross infection risk Building and Environment, Vol. 106, pp. 340-351
  7. Holistic performance analysis and turbine-induced damping for an OWC wave energy converter Renewable Energy, Vol. 85, pp. 1155-1163
  8. Expanding metabolite coverage of real-time breath analysis by coupling a universal secondary electrospray ionization source and high resolution mass spectrometry – A pilot study on tobacco smokers Journal of Breath Research, Vol. 10, Núm. 1
  9. Computational study of organic solvent-CO2 mixing in convective supercritical environment under laminar conditions: Impact of enthalpy of mixing Journal of Supercritical Fluids, Vol. 109, pp. 109-123
  10. Capturing in Vivo Plant Metabolism by Real-Time Analysis of Low to High Molecular Weight Volatiles Analytical Chemistry, Vol. 88, Núm. 4, pp. 2406-2412
  11. Airflow patterns through a sliding door during opening and foot traffic in operating rooms Building and Environment, Vol. 109, pp. 190-198
  12. A computational study about the types of entropy generation in three different R134a ejector mixing chambers International Journal of Refrigeration, Vol. 63, pp. 199-213

2015

  1. Transversal modulation ion mobility spectrometry (IMS) coupled with mass spectrometry (MS): Exploring the IMS-IMS-MS possibilities of the instrument Analytical Chemistry, Vol. 87, Núm. 3, pp. 1925-1932
  2. Real-Time High-Resolution Tandem Mass Spectrometry Identifies Furan Derivatives in Exhaled Breath Analytical Chemistry, Vol. 87, Núm. 13, pp. 6919-6924
  3. Performance of OWC wave energy converters: Influence of turbine damping and tidal variability International Journal of Energy Research, Vol. 39, Núm. 4, pp. 472-483
  4. Numerical algorithm for the accurate evaluation of ion beams in transversal modulation ion mobility spectrometry: Understanding realistic geometries International Journal of Mass Spectrometry, Vol. 376, pp. 97-105
  5. Non-dimensional analysis for matching an impulse turbine to an OWC (oscillating water column) with an optimum energy transfer Energy, Vol. 87, pp. 481-489
  6. Influence of flow swirling on the aerothermodynamic behaviour of flames Combustion, Explosion and Shock Waves, Vol. 51, Núm. 4, pp. 424-430
  7. Identification of 2-alkenals, 4-hydroxy-2-alkenals, and 4-hydroxy-2,6-alkadienals in exhaled breath condensate by UHPLC-HRMS and in breath by real-time HRMS Analytical Chemistry, Vol. 87, Núm. 5, pp. 3087-3093
  8. Benchmarking for practical training in computational fluid dynamics Journal of Cases on Information Technology, Vol. 17, Núm. 1, pp. 1-12
  9. An isothermal analysis of curved-vane and flat-vane swirlers for burners Engineering Computations (Swansea, Wales), Vol. 32, Núm. 3, pp. 668-686
  10. An experimental and computational study of the flow pattern in a refrigerant ejector. Validation of turbulence models and real-gas effects Applied Thermal Engineering, Vol. 89, pp. 795-811
  11. A novel twin-rotor radial-inflow air turbine for oscillating-water-column wave energy converters Energy, Vol. 93, pp. 2116-2125

2014

  1. Optimisation of turbine-induced damping for an OWC wave energy converter using a RANS-VOF numerical model Applied Energy, Vol. 127, pp. 105-114
  2. Numerical analysis of a unidirectional axial turbine for twin turbine configuration Applied Ocean Research, Vol. 47, pp. 1-8
  3. An experimental investigation of a R-134a ejector refrigeration system International Journal of Refrigeration, Vol. 46, pp. 105-113
  4. Aerodynamic characterization of isothermal swirling flows in combustors International Journal of Energy and Environmental Engineering, Vol. 5, Núm. 2-3, pp. 1-6

2011

  1. Tip clearance effect on the flow pattern of a radial impulse turbine for wave energy conversion Journal of Turbomachinery, Vol. 133, Núm. 4
  2. Quantification of mixing efficiency in turbulent supercritical water hydrothermal reactors Chemical Engineering Science, Vol. 66, Núm. 8, pp. 1576-1589
  3. Numerical simulation of the performance of a human nasal cavity Engineering Computations (Swansea, Wales), Vol. 28, Núm. 6, pp. 638-653
  4. Dispersion analysis of an energy-orthogonal thin plate finite element International Journal of Computational Methods, Vol. 8, Núm. 3, pp. 425-462
  5. An improved radial impulse turbine for OWC Renewable Energy, Vol. 36, Núm. 5, pp. 1477-1484

2008

  1. Optimization of a hospital room by means of CFD for more efficient ventilation Energy and Buildings, Vol. 40, Núm. 5, pp. 849-854
  2. Numerical modelling in wave energy conversion systems Energy, Vol. 33, Núm. 8, pp. 1246-1253
  3. Flame kernel growth in a rotating gas Combustion Science and Technology, Vol. 180, Núm. 2, pp. 391-399
  4. Experimental study of parallel and inclined turbulent wall jets Experimental Thermal and Fluid Science, Vol. 33, Núm. 1, pp. 132-139
  5. A modal error indicator based on a work-cancellation property of energy-orthogonal axisymmetric finite elements International Journal of Computational Methods in Engineering Science and Mechanics, Vol. 9, Núm. 1, pp. 60-76

2006

  1. Numerical and experimental analysis of different ventilation systems in deep mines Building and Environment, Vol. 41, Núm. 2, pp. 87-93
  2. Estudio estructural de polvos Cu-Cr aleados mecánicamente Revista de metalurgia, Vol. 42, Núm. 5, pp. 334-344
  3. Estudio de las emanaciones de naftaleno en un edificio de oficinas Montajes e instalaciones: Revista técnica sobre la construcción e ingeniería de las instalaciones, Año 36, Núm. 402, pp. 55-59
  4. Cutoff wave numbers for energy-orthogonal eight-node quadrilateral plane-strain elements Computers and Structures, Vol. 84, Núm. 3-4, pp. 230-242
  5. 3D unsteady flow simulation in an OWC wave converter plant Renewable Energy and Power Quality Journal, Vol. 1, Núm. 4, pp. 350-355

2005

  1. Thermographic study of energetic installations Applied Thermal Engineering, Vol. 25, Núm. 2-3, pp. 183-190
  2. Numerical simulation of the deflagration to detonation transition Combustion, Explosion and Shock Waves, Vol. 41, Núm. 2, pp. 215-222
  3. Effect of the bismuth content on the interface reactions between copper substrate and Sn-Zn-Al-Bi lead-free solder Revista de metalurgia, Vol. 41, Núm. 1, pp. 208-212
  4. Determinación de la calidad de ventilación en viviendas Montajes e instalaciones: Revista técnica sobre la construcción e ingeniería de las instalaciones, Año 35, Núm. 391, pp. 72-77
  5. Computational fluid dynamics simulations of the airflow in the human nasal cavity Acta Otorrinolaringologica Espanola, Vol. 56, Núm. 9, pp. 403-410

2004

  1. Numerical model for two-phase solidification problem in a pipe Applied Thermal Engineering, Vol. 24, Núm. 17-18, pp. 2501-2509
  2. Extinction of premixed methane-air flames by water mist Fire Safety Journal, Vol. 39, Núm. 7, pp. 581-600

2003

  1. Evaporazione e ignizione di gocce isolate di n-eptano in condizioni di microgravità Rivista dei Combustibili, Vol. 57, Núm. 2-3, pp. 97-116

2000

  1. Considerations on the gas-phase velocity field in a nonevaporating diesel spray Automization and Sprays: Journal of the International Institutions for Liquid Atomization and Spray Systems, Vol. 10, Núm. 6, pp. 529-543

1997

  1. Parametrized variational principles in dynamics applied to the optimization of dynamic models of plates Computational Mechanics, Vol. 20, Núm. 4, pp. 285-294
  2. Equilibrium of ventilated cavities in tip vortices Journal of Fluids Engineering, Transactions of the ASME, Vol. 119, Núm. 4, pp. 759-767
  3. A method to determine liquid concentration in non-stationary axisymmetric sprays Experiments in Fluids, Vol. 23, Núm. 4, pp. 299-305

1996

  1. Correlaciones para determinar las propiedades termofísicas de los refrigerantes CFC12 y HFC 134 A en sistemas de aire acondicionado Montajes e instalaciones: Revista técnica sobre la construcción e ingeniería de las instalaciones, Año 26, Núm. 292, pp. 95-100

1994

  1. Sistema de onda portadora digiral para líneas de M.T Energía: Ingeniería energética y medioambiental, Año 20, Núm. 1, pp. 67-74
  2. Principios de refrigeración y acondicionamiento de aire Montajes e instalaciones: Revista técnica sobre la construcción e ingeniería de las instalaciones, Año 24, Núm. 275, pp. 75-80
  3. Modelado de un evaporador de aire acondicionado Montajes e instalaciones: Revista técnica sobre la construcción e ingeniería de las instalaciones, Año 24, Núm. 273, pp. 67-72
  4. Cálculo de pérdidas de carga en condensadores de aire acondicionado Montajes e instalaciones: Revista técnica sobre la construcción e ingeniería de las instalaciones, Año 24, Núm. 277, pp. 69-78

1990

  1. Dynamics of an elongated bubble during collapse Journal of Fluids Engineering, Transactions of the ASME, Vol. 112, Núm. 2, pp. 232-237

1987

  1. WAVE AND CAVITY PROPAGATION ALONG A TIP VORTEX INTERPHASE. PCH. Physicochemical hydrodynamics, Vol. 9, Núm. 3-4, pp. 611-620
  2. Collapse of an enlarged bubble in cavitation processes. ANAL. ING. MEC., Vol. 5, Núm. 2 , Dec. 1987, pp. 39-43

1986

  1. Study of the water fluid flow field beyond finite length blade. ANAL. ING. MEC., Vol. 4, Núm. 2 , Dec. 1986, pp. 201-206